Eko Yohanes Setyawan, Soeparno Djiwo, Djoko Hari Praswanto, Purbo Suwandono, Parulian Siagian, Waldemar Naibaho
Potential renewable energy source that can be greatly utilized is the water flow, namely hydropower. The hydropower is one of the efforts to answer the energy crisis occurred in several regions due to lack of awareness to develop alternative energy. This effort will be done by designing a hydroelectric power plant. Before being made, it was studied using CFD simulation using Ansys Student Version 19.1 that was calculated based on flow assumptions. One model of the approach used is k-epsilon, with the initial flow rate of 5 m/s. By using water-liquid fluid material, the speed of water produced around the wheel is 2.19 m/s while the speed of water after passing the water wheel is 5.07m/s. © Published under licence by IOP Publishing Ltd.
Mechanical Engineering, Faculty of Engineering, National Institute of Technology Malang, jl. Bendungan Sigura-gura No.2, Malang, 65152, Indonesia; Mechanical Engineering Department, Universitas Widyagama Malang, Jl. Taman Borobudur, Malang, Indonesia; Mechanical Engineering Department, Universitas HKBP Nommensen, Medan, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock